Canopies

Canopies are the quickest and most economical solution to provide additional protection for weather-resistant goods. Due to the protective roofing in the form of PVC covering or corrugated steel sheets and the open sides they can be used to load articulated vehicles, or as passages or tunnels.

  • Storage of weather-resistant goods
  • Protected loading of transporters
  • Protected storage space
  • Order picking of all kinds of goods
  • Roofing for sporting facilities
  • Creating passages between buildings

Roof covering

Our robust roof covers are the ideal cover for canopies, tunnel structures or buildings where no highly sensitive goods are stored. The covers are made of highly tear-resistant industrial PVC – a strong, durable and cost-effective material compared to other roofing materials. The PVC cover offers decades of protection against sun, rain, hail or frost and is specially designed for long-lasting roofing. Due to their low weight, PVC covers can be installed quickly and thus cost-effectively. This flexibility is also an advantage should the cover need to be replaced in the event of damage. Due to their translucent material, sufficient daylight is always ensured.

Corrugated steel sheets

Corrugated steel sheets are the ideal option to ensure even better protection against all weather conditions. Depending on the desired use and the goods to be stored, corrugated steel sheeting is an extremely low-maintenance and durable alternative to classic PVC covers. In addition, a roof made of corrugated steel sheet metal offers the attractive advantage of installing photovoltaic modules for energy generation and thus extending the benefits of the product.

Anchoring

For maximum stability, HR-Structures canopies are optionally equipped with ground stakes, rawl bolts or chemical anchors.

Stakes

Anchoring by means of ground stakes is the most common and cheapest variant for fastening the roofing. It can be installed on a wide variety of substrates without any problems. To ensure optimal fastening, the top layer, base layer and frost protection layer of the ground should be at least 80 cm in total.

Rawl bolts or chemical anchors

If the substrate of the roofing is not suitable for fastening with ground stakes, we at HR-Structures recommend mounting with heavy-duty rawl bolts. The fastening of the rawl bolts or chemical anchors always requires a concrete or strip foundation, which must be poured in advance. Our team will be happy to advise you on the dimensions of the foundation.

General advantages of buildings

General advantages of buildings

Full-Service

Full-Service

From consulting to design and static measuring to delivery and installation – our offered services optimally complement one another.

Flexibility

Flexibility

Systems from canopies to non-insulated to insulated models with sandwich panelling in the roof and at the side – our buildings are universally deployable.

Fast delivery times

Fast delivery times

You need short-term space solutions? We produce and deliver your desired tent in the shortest possible time.

Economics

Economics

Cost-efficient, reusable and long-lasting – top-quality products “made in Germany” at fair prices.

Service life

Service life

Permanent structures or a temporary solution? Our building systems cover any duration of use. You can decide between renting or purchasing a light-weight building.

Full-Service

Von der Beratung über die Konstruktion und statische Bemessung bis hin zur Lieferung und Montage – unser Leistungssortiment ist optimal auf einander abgestimmt.

Full-Service

Flexibilität

Systeme von Überdachungen über unisolierte bis zu isolierten Varianten mit Sandwich-Verkleidung im Dach und der Seite – unsere Hallen sind universell einsetzbar.

Flexibilität

Schnelle Lieferzeit

Sie benötigen kurzfristige Raumlösungen? Wir produzieren und liefern Ihr Wunschzelt in kürzester Zeit.

Schnelle Lieferzeit

Wirtschaftlichkeit

Kosteneffizient, wiederverwertbar und langlebig – Qualitativ hochwertige Produkte “made in Germany” zu fairen Preisen.

Wirtschaftlichkeit

Standzeit

Feste Bauten oder doch eine temporäre Lösung? Unsere Hallensysteme decken sämtliche Standzeiten ab. Hierbei können Sie zwischen der Anmietung und dem Kauf einer Leichtbauhalle entscheiden.

Standzeit

Canopies for industrial loading zones and storage areas

You are looking for a reliable industrial roofing for your weather-insensitive goods, which brings along an attractive price-performance ratio in addition to quality? With more than 60 years of experience and as a pioneer in the construction of industrial halls, we undertake the construction of tailor-made roofings that are oriented towards your needs and ideas. It goes without saying that we use high-quality materials such as aluminum for stable canopies, intelligent designs and careful assembly.

Every industrial roofing can be realized in different sizes. For the roof, we are experts in PVC roofing and trapezoidal steel sheeting. The sides of our roofing remain open. This enables fast loading and unloading of goods as well as a direct transition. Our smart canopies can even be used as tunnels. The versatile application possibilities bring you immense flexibility. Adapt canopies to your requirements. For every project.

We at HR-Structures will accompany you. As a family-run company, we set ourselves high standards and build roofing for you that is technically, qualitatively and economically convincing. Canopies are your solution when it comes to creating loading zones and storage areas within the shortest possible time, efficiently protecting goods and merchandise from direct sun, rain, hail or snow from above. Get to know our canopies.

Our services & your advantages

Customer Service

Customer service is our top priority. Our qualified employees are available worldwide to provide you with advice.

Financing

Whether you prefer to rent, finance or purchase – you will always find a suitable solution in our range of products.

Certifications

Our company has been certified pursuant to the latest standards and guidelines.

Full Service

From manufacturing to transport to a fully installed tent and building construction.

Made in Germany

From planning and construction to our own manufacturing in Germany – we will deliver your product in the requested time frame and quality.

Design & Innovation

Our internal technical department and implementation of innovative products allows us to always strive for continuous further development of our products.

Ihr Titel

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

Why Build Canopies?

Industrial canopies with a stable roof and open sides have become established as temporary or permanent solutions, especially in sectors such as logistics, manufacturing, and wholesale and retail. This allows goods to be stored in a weather-resistant (short-term) and well-protected manner, as well as prepared for onward transport. But the roofing also shows its qualities for events.

Canopies are used here:

  • storage for weather-insensitive goods
  • protected loading of transporters
  • protected parking and storage area
  • commissioning for goods of all kinds
  • roofing of sports facilities
  • formation of transitions between buildings

Which roof is right for canopies?

Our robust roof tarpaulins for canopies are the perfect companion for canopies, tunnel structures or for industrial hall application, where no highly sensitive goods are stored. The sturdy tarpaulins are made of highly tear-resistant industrial PVC – a strong and durable material, which, in comparison with other roofing materials, is also extremely good value for money. The PVC tarpaulin of canopies offers decades of protection against sun, rain, hail or frost and is specially designed for long-lasting service life of the roofing. Due to their light weight, PVC tarpaulins can be installed quickly and thus save costs. The flexibility proves to be particularly advantageous when the tarpaulins have to be replaced in case of damage. Due to the translucent material, the PVC tarpaulins provide sufficient daylight in the roofing.

Furthermore, we install trapezoidal sheets in our canopies upon your request. These prove their ability when it comes to comprehensive protection against all weather conditions. Trapezoidal sheets are particularly low-maintenance and have a long service life. Another plus: You can equip the trapezoidal sheets on your industrial roofing with photovoltaic modules and use the roofing directly for energy generation.

How to fix a roofing?

We anchor canopies using ground nails or heavy-duty dowels. This depends on the condition of the subsoil, which our experts naturally check in detail for safe installation. Ground nails for roofing are the most common type of fastening. They can be used on most substrates without any problems. To ensure optimal anchoring, the top layer, base layer and frost protection layer of the ground should total at least 80 cm.

If we determine that a subsoil is not suitable for fastening with ground nails for canopies, we at HR-Structures recommend installing the roofing with heavy-duty dowels. In case of fastening by means of dowels, a concrete or strip foundation must be poured in advance, which we will gladly do for you. Our team will be happy to advise you on this.

Why build canopies with hr-structures?

Years of experience, our own production in Germany, innovative technology such as state-of-the-art CNC systems and a high demand for quality make us your professional partner when it comes to the construction of industrial roofing. Experience 360-degree support with us. From the beginning we are at your side, advise you in detail, take over the individual construction of the roofing based on your ideas, carry out a static dimensioning, organize the delivery and the assembly. 100 % “Made in Germany” from a single source. This is how canopies works today.

Do you have any questions? We will be happy to advise you personally. Contact us right away.

leigh middleton

We are happy to be there for you!

Give us a call. We will advise you individually:

+44 7355 063543

Or use our call-back service - we will get back to you!

Questions & Answers

Building permit

Your Title Goes Here

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

When do I need a building permit?

Depending on the standing time, the type of hall, the anchoring and the local specifications, the submission of a building permit can be assessed differently. With a flying construction according to DIN EN 13782, the presentation of an inspection book is usually necessary and no elaborate building permit. In the case of a permanent fixed construction, a building permit is usually required. The building owner is responsible for obtaining a building permit – we will be happy to support you in this.

Flying construction

Your Title Goes Here

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

What does flying construction (DIN EN 13782) mean?

The main feature of flying construction is the possibility of repeated assembly and disassembly at different locations. In this case, a test book is supplied by HR-Structures on request, which offers the advantage of the simplified building permit procedure. As a rule, temporary structures are allowed to be erected for a period of three months, but this period can be extended. The anchoring is solved here with the help of ground nails, but can also be done by means of dowels on an existing floor slab.

Fastening

Your Title Goes Here

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

How is my hall with a canopy fastened?

There are different fastening options, which vary depending on the type of hall, service life and existing substrate. As a rule, flying structures are fastened by means of ground nails without a foundation and fixed structures are fastened to a foundation with the help of dowels. Other options, such as ballasting or concrete-free foundations, must be clarified in individual cases on request.

Contact us without obligation

Our employees are gladly available for advice relating to industrial and event tents.

Industrial tents & halls

Quick space acquisition with flexible hall systems

Event tents

Individually applicable tent systems for your event

Callback-Service

Request event tent

You would like to enquire about an event tent or need a non-binding offer?
Simply fill out our form and we will do the rest for you!

Simply fill out our form and we will do the rest for you!

Call-back service

Request industrial hall

Request a non-binding offer for your industrial hall.

Simply fill out our form and we will do the rest for you!

Industrial hall

Quick space savings with flexible building systems

Event tents

Individually deployable tent systems for your event