Industrial Roofing
for Loading Zones and Storage Areas

Every industrial canopy can be different sizes tailored to your needs and available space. We are experts in PVC sheet roofs for canopies. The sides remain open so you can load and unload goods quickly. They can even be used as a tunnel or to provide a covered area between two adjoining buildings. We set high standards for ourselves and build roofing that is strong yet lightweight and of good value for you. Within a very short time, loading zones and storage areas are created that efficiently protect goods from direct sun, rain, hail, or snow.

Your Benefits with
HR-Structures

Full Service

From advice to construction and structural analysis through to delivery and assembly - our range of services is fully coordinated.

Flexibility

Building systems ranging from canopies to uninsulated or insulated temporary industrial buildings for a wide range of applications.

Fast Delivery Time

Do you need short-term space solutions quickly? We produce and deliver your ideal building in the shortest possible time.

Value

Our high.quality industrial buildings are made in Germany, cost-efficient and recyclable.

Service Life

Permanent buildings or a temporary solution? Rent or buy our lightweight aluminium framed industrial buildings depending on how long it will be in use.

Technical Advantages of Our
Canopies

Cantilever span from 5m to 30m

Infinitely expandable building length

Wall heights up to 7.3m

High wind and snow loads

Ground anchoring with and without foundations

Temporary and permanent industrial building solutions

Bespoke building sizes and equipment available on request

Cladding and
Anchoring

Roof Cladding

Choose between single skin PVC sheets or double layer, air-filled insulated roofing sections.

PVC Sheet

Our robust PVC roofs are the ideal cover for canopies, tunnels or buildings where no sensitive goods are stored. The roof coverings are made of highly tear-resistant industrial PVC - a strong, durable and cost-effective material compared to other roofing materials. These PVC panels are specially designed for long-term roofing and they deliver decades of protection against sun, rain, hail or frost. Due to their low weight, PVC roofs can be installed quickly and cost-effectively. This is also an advantage if damaged panels need to be replaced. The translucent material also allows sufficient daylight into the building.

Corrugated Sheet Metal

Corrugated metal sheeting is the ideal material to ensure high protection from all weather conditions. They are also extremely low-maintenance and durable alternatives to PVC sheeting. In addition, roofing made from corrugated sheet metal provides a strong surface to mount solar panels for generating electricity.

Anchoring

For maximum stability, HR-Structures halls are anchored using either pegs or dowels.

Ground Pegs

Using ground pegs is the most common and cost-effective way of anchoring a canopy. They can secure a canopy to a wide variety of substrates without any problems. To ensure optimum fastening, the surface layer, base layer and frost protection layer of the ground should total at least 80cm.

Dowels

If the substrate of the canopy is not suitable for fastening with ground pegs, we recommend installation with heavy-duty dowels. Anchoring a building with dowels always requires a concrete or strip foundation, which must be poured in advance.

Examples of Our
Roofs

54

Roofing for Storage Purposes

Width: 18 m
Size: 540 m²
Length: 30 m
Height: 5.3 m
Show More
Contact us
71

Protective Roof Covering For Christmas Ice Rink

Width: 20 m
Size: 600 m²
Length: 30 m
Height: 4.3 m
Show More
Contact us

We Are Here For You!

Call us for advice.

+49 6644 / 820 453 - 0

Or use our call back service and we will return your call.

Request a Callback

Applications For
Roofing Panels and Sheets

Custom-made Industrial Roofing
Flexibility and Quality From HR-Structures

Every industrial canopy can be different sizes tailored to your needs and the space you have available. We are experts in PVC sheet roofs for canopies. The sides remain open so you can load and unload goods quickly. They can even be used as a tunnel or to provide a covered area between two adjoining buildings.

We set ourselves high standards and build roofing for you that is strong yet lightweight and good value. We create loading zones and storage areas within a very short time that efficiently protect goods and goods from above from direct sun, rain, hail or snow.

Rent or Buy Roofing
The Choice is Yours.

You can rent or buy our industrial buildings.

Benefits of Purchasing:

Full control: Design the building according to your business needs.
Long-term investment: Ownership of a high quality product for long-lasting use.
Customizability: Ability to customize the product according to your own requirements.

Benefits of Renting:

Flexibility: Short-term space solutions without long-term commitment.
Cost Efficiency: Lower initial investment compared to purchasing.
Maintenance included: Maintenance and repairs are usually included in the rental agreement.

The decision between renting and buying should be carefully considered based on your company's individual needs, financial capabilities and long-term plans. Our experts are happy to advise you on the best option for your business.

Our Services For
Your Benefits

Customer Support

Our experienced and knowledgeable support staff are here to deliver the highest quality customer service worldwide.

Financing

Whether renting, financing or purchasing outright, we have the right package for your business.

Certification

HR-Structures is certified to the latest standards and guidelines in your territory.

Full Service

From production to transport to the fully assembled industrial building construction.

Made in Germany

All our industrial buildings and event tents are made to the highest quality and delivered from our production facility in Germany.

Design and Innovation

Product innovation in our technical department allows us to constantly develop our building products.

FAQ
Questions and Answers

General Information

Industrial canopies are established as temporary or permanent storage solutions in areas such as logistics, manufacturing, wholesale and retail. Goods can be stored in a weather-resistant and well-protected manner and prepared for transport.

An industrial canopy can be used for the following:

  • Storage for weather-resistant goods
  • Protected transporter loading
  • Covered parking and storage area
  • Picking goods
  • Roofs of sports facilities
  • Covered transitions between buildings

Years of experience, our in-house production in Germany, state-of-the-art CNC systems and high quality standards are the HR-Structures recipe for industrial canopies. We support you right from the start to provide as much detailed advice as you need. We then complete the canopy design based on your specific requirements and carry out a full structural analysis. Once manufacturing is complete, we arrange for the canopy components to be delivered and installed. This is our one-stop-shop process for your industrial canopy.

If you have any questions, please contact us now.

Anchoring

We anchor industrial canopies using ground pegs or heavy-duty dowels. This depends on the condition of the surface, which our experts will check carefully to ensure safe installation. Ground pegs are the cheapest and easiest type of anchoring for canopies. They can be used on most surfaces without issues. To ensure optimal anchoring, the top layer, base layer and frost protection layer of the floor should be at least 80cm thick. However, this anchoring requires co-ordination with the local authorities.

If ground pegs are not possible to anchor the industrial canopy, we a recommend installing the canopy with heavy-duty dowels. When anchoring with dowels, a concrete strip or full foundation must be poured in advance. Please contact us if you have questions.

Planning Permission

Depending on the service life, the building type, how it is anchored to the ground and the local requirements, the requirement for a building permit will vary. For a temporary construction according to DIN EN 13782, the submission of an inspection book is usually necessary and no complex planning permission is required. However, planning permission is usually required for a more permanent structure. The building owner is responsible for obtaining this but we are happy to help. We work closely with a town planning agency that specialises in planning permission approvals.

Roof Panels

Our robust PVC roof panels are perfect for canopies, tunnels and for industrial building applications where no sensitive goods are stored. The sturdy sheets are made of highly tear-resistant industrial PVC which is a strong and durable material that is also extremely cost-effective compared to other roofing materials. The PVC sheets of an industrial canopy offers decades of protection against sun, rain, hail or frost and has been specially designed for the long service life of the canopy. They can be installed quickly and cost-effectively, and are easily replaced in the unlikely event of damage. The material is also translucent so a good level of daylight passes through the roof into the building.

Flying Buildings

The main feature of the mobile construction is the possibility of repeated assembly and dismantling in different locations. An inspection book from HR-Structures can be supplied upon request, which offers the advantage of a simplified building permit process. As a rule, temporary structures are permitted for a period of three months, although this can be extended. The anchoring is done here using pegs, but can also be done using dowels on an existing floor slab.

Contact Us

Our experts will be happy to advise you on all aspects of our industrial buildings
and event tents.

 

Contact Form